Listen Live

On Air Now

Transmission Site at Fort McMurray

CKUA has 16 FM transmitters ranging in effective radiated power from 15 watts to 100,000 watts. As one would guess, the higher the power the further away a usable signal can be received. As a general rule the high-power sites can be received with most radios at a distance of approximately 100km. This depends on weather, terrain between the antenna and receiver, and the quality of the receiver.

There are five parts of an FM transmission site:
1. Building
2. Transmitter
3. Tower
4. Antenna
5. Satellite Dish/Receiver

The buildings in CKUA’s network range in size from a 5 foot by 5 foot phonebooth-sized building in Hinton to a large multi-station facility in Calgary. These buildings house the transmitter and related equipment.

The transmitters range in output power from 25 watts to 22,000 watts. Some of our older transmitters use tubes to generate the high power needed. Newer transmitters are solid state. These transmitters are inefficient and generate a lot of heat. This excess heat needs to be removed from the building. This means that the building must have some way to remove the heated air or air condition the room.

The tower is the steel structure that the antenna is mounted on. These towers range in height from 50 feet to over 500 feet. It is located close to the building because the transmitter is connected to the antenna with a large coax cable. The tower is held up with steel cables called guy lines anchored to large blocks of concrete.

The antenna is a construct of pipe that provides an effective gain in power. The antenna multiplies the power of the transmitter by a factor of .6 to 6 times. These antennas can be 1 meter long to 25 meters in length and weigh up to 3500 lbs.

Satellite Dish
CKUA transports its programs to each site via satellite. The dish is located beside the building and is pointed at a satellite called Anik F1R. The dish can be as large as 12 feet across.